NACS EV Charging Cable and Plug Holder REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combination of existing (excellent) models to minimize space needed for an NACS-based home EV charger.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a space-efficient solution for storing my home EV charging setup which supports both J1772 (Kia Niro EV) & NACS (Ioniq 5).
While @StorageB_83058's charging cable and plug holder fit my space-efficient requirements exactly, I needed something that would capture the plug with my NACS adapter in place. Stumbling across SorrowBJD's model, I was able to do some cutting (and glueing) to combine these 2 models into a perfect solution for my needs. I just superglued the adapter to the holder and clamped it for a bit to assure a good bond.
Hopefully this works for you too!
NOTE: The NACS adapter may require some custom filing to fit your specific NACS adapter/handle. Also, note that the plug handle is not captured tightly, so make sure that if it accidentally falls from the holder, it doesn't make it all the way to the ground with a disappointing (and potentially destructive) thud!