Prusa MK3S 5.5mm nozzle camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE 2019-09-03 Added new mount with a screw tightener to keep a camera in place while it gets hot.
- Ocena
- 4,8 / 5
- Polubienia
- 75
- Pobrania
- 433
- Wydruki
- 4
- Wyświetlenia
- 4879
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 2019-09-03 Added new mount with a screw tightener to keep a camera in place while it gets hot. Also added a new extruder cover with zip-lock for camera wire.
Upgraded my Prusa MK3 extruder to MK3S version and the old nozzle camera mount can't be used behind the printing head any more. So tinkering a bit with camera placement, found the left side be quite good.
Found smallest 720P 5.5mm wide endoscope to be suitable for nozzle camera from AliExpress: 2 IN 1 USB Endoscope 720P HD 5.5mm Lens.
This camera is UVC standard, so can be used with linux, osx, wondows and android. So it works pretty well with OctoPrint also.
Nozzle camera video: https://www.youtube.com/watch?v=WNYF9QK-BYs
Nozzle timelapse: https://www.youtube.com/watch?v=yu4UqMmRJVc
Camera mount preview: https://youtu.be/P0md7P-GZ3E