1 / 2
Leitungskanal-Halterung / Cable Duct Mounting (incl. OpenSCAD source) — zdjęcie 1
1 / 2

Leitungskanal-Halterung / Cable Duct Mounting (incl. OpenSCAD source)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Leitungskanal-Halterung / Cable Duct Mounting (incl. OpenSCAD source)

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

At work we had a bunch of old HHDs to destroy and some LWL/Cat7-cables to lead nicely in the racks.

So I disassembled the HDDs for the neodyms and printed a mount with a hole for the magnet. The mounts fit on the Würth LFK 60x90.

First I designed the thing for hex nuts, but realized that we have a bunch of cage nuts nobody used a long time.

160cm LFK with 5 mount-points are strong enough for everything...

Feel free to redesign this thingy back to hex nuts if you like, or anything else :-)

Tagi