Fanatec ClubSport GT Cockpit BST-1 Bass Shaker Mount - Sheet Metal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
STL of a sheet metal Dayton Audio BST-1 bass shaker mount for the four corners of Fanatec's ClubSport GT cockpit.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Version of my Dayton Audio BST-1 bass shaker mount for the four corners of Fanatec's ClubSport GT cockpit to be cut from sheet metal from SendCutSend or similar. I suggest 3.4mm Mild Steel. I also have a version for 3D printing, ideally of PETG-CF. This version is revised from my original to rotate the BST-1 so the speaker wire connections point at the cockpit and include a hole in the plate to route speaker wires from under the plate. Picture shows the printed version which this file is based off of. Cut as is for the RR and LF corners. Mirror it for the LR and RF corners.
