McLane Backlapping Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool used to backlap the McLane Reel Mower.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This tool is used fit on the sprocket of a McLane reel mower so that the reel can be backlapped.
Two different versions available. My preferred print is used with a 5/16 Carriage Bolt and Anti-spin washer from Home Depot. The other print can be used with a 21mm Socket.
Carriage Bolt Version: I printed with Sainsmart TPU. Used a 5/16 x 2" carriage bolt, 5/16 anti-spin washer, a regular, and a nut. I used red locktite to lock the nut in place. Can also use a nylon lock nut. I then ground 3 flats onto the bolt so that it would stay in place on the chuck of the drill.
Go in store to look for the 5/16 carriage bolt and anti-spin washer. They can be bought individually and the hardware costs less than $5.
https://www.homedepot.com/p/Everbilt-5-16-in-18-x-2-in-Zinc-Plated-Carriage-Bolt-800146/204633685
https://www.homedepot.com/p/Everbilt-5-16-in-Rust-Defender-Gray-Torque-Washer-812946/303676262
21mm Socket Version: Simply print the adapter and use with a 21mm Socket on the drill. I printed in PLA.
UPDATES:
Current files include a greater depth for the socket to fit into and a chamfer to allow the socket to fit onto the sprocket easier.