1 / 1
Replacement handle for Karcher WD3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for Kärcher WD3 wet/dry vacuums. Easy print, strong fit, sliced for Prusa MK4. Works with PLA
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
# Kärcher WD3 Replacement Carrying Handle
A 3D printed replacement carrying handle for Karcher WD3 / WD2 series wet/dry vacuum cleaners.
### Tested Print Settings
* Slicer: PrusaSlicer
* Printer: Prusa MK4S (Input Shaper)
* Material: PLA
* Layer Height: 0.20 mm
* Infill: 15%
* Supports: Enabled
Note: If using PLA at 15% infill, consider increasing perimeters (wall count) to 4–6 walls to ensure maximum strength on the mounting pins when lifting a heavy vacuum bucket.