"Universal" Dirtbike Ignition Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ignition mount for the Honda FourTrax 300 switch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
"Universal" Ignition mount uses the ignition replacement from a Honda Fourtrax 300 (1988-2000) - 4 wire.
This Ignition is essentially a "connect and play" as a 4 wire ignition switch is all you need
Ignition Switch: https://a.co/d/03L4mExG
ALWAYS CHECK WITH YOUR OWN VOLTMETER
[RED / BLACK - ORANGE] - ENGINE KILL WIRE PAIR
[RED - BLACK] - 12V and E-START
(red and black should have connectors while the red and black striped + orange need to be wired in a 3 way)
PROTOTYPE PRINTED IN: PLA
RECOMMENDED: PETG
Youtube Tutorial:
huge thanks to Alex Ciepluch for this in depth tutorial for this exact project!
This was a little project of mine that i decided to dive head first into, I started off with rough designs and just started upscaling with a digital gauge, i am quite proud of this as this would be my first 3d model ever made that was successful.
This is a project that i plan to improve a bit more so i will be revising the model to be much more stronger
IF YOU HAVE IMPROVEMENTS PLEASE REMIX!!!