3D printed Smart wallet (thicker bolts) +Dragon customisation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
original is hecken cool, but needed 100% more dragons.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 1272
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The original is hecken awesome, but I ran into an issue, and that is my M3 screw heads were bigger than the model allowed, so I increased the thickness of the middle and top plates to allow for the screw heads. this also has the advantage of allowing more cash to be stored.
I only needed to add roughly 1 mm of height so its still very compact in its design.
included in my remix is a dragon design for the bottom plate (please note that the “DLD” on the top isn't included in the remix.)
Just like for the Voron original, slice the model, then add a color change for the dragon version. roughly 2 layers (depending on settings)
you still need the lever, and clip from the original model (and bottom if you don't want the dragon) follow all the instructions there, (original here; https://www.printables.com/model/41425-3d-printed-smart-wallet-updated-for-m3-bolts )