1 / 4
Intex Solar Cover Reel Adapter for 244 cm Wide Pools — zdjęcie 1
1 / 4

Intex Solar Cover Reel Adapter for 244 cm Wide Pools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Because I should've read the description before buying... Again... :D

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Intex Solar Cover Reel Adapter for 244 cm Wide Pools

I bought the Intex Solar Cover Reel before realizing that it is only designed for above-ground pools that are 274 cm wide or larger.

Since my pool is 244 cm wide, I designed this simple adapter so the reel can be installed without modifying the original kit.

Installation

Use two of the aluminum connector tubes included with the Intex reel.

Do not use the small end connector supplied in the original kit.

Instead, insert this adapter between the aluminum tube and the reel mechanism.

The fit is intentionally snug to provide a secure connection. Depending on your printer's tolerances, you may need to apply a little pressure during assembly.

Printing Recommendations

Because this part will be exposed to sun, heat, and moisture, I recommend printing it in PETG, ASA, or another weather-resistant material. PLA is not recommended for long-term outdoor use.

If this adapter saves you from buying a different reel, I'd appreciate a like, download, or make!