Modular 18650 3S2P Battery Pack Case - USB & Jack Output
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular 3-part 18650 3S2P battery case with protective insulator layer and top cover for USB and DC Jack outputs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1.1 + General Attribution v1
This is a modular power supply and powerbank with a 3S2P 18650 battery pack, a Qualcomm QC 3.0 fast charging module with a USB-A output and a jack output.
There are 3 components: Main case, isolation part, and the lid. The main case is for putting the battery pack and other modules inside. The isolation part isolates the batteries and modules to prevent a short circuit. And the lid protects the modules from other things.
What you need for assembly: double-sided tape and a glue stick (optional). Also, you can use other things to stick the modules or battery, but you must select things that don't harm the battery.
Assembly: Put double-sided tape on the battery pack's bottom. Then put the battery pack into the case. Pay attention to ensure that the battery is stuck to the case. Then put double-sided tape onto the isolation part and put the sticky part onto the battery. If you don't use double-sided tape, do not use hot glue or glues that can harm the battery!!! Then you can put your modules on the isolation part. Then put the lid on the case and glue it.
Recommended print settings: It's recommended to use PETG or ASA/ABS due to high temperatures. And it's recommended to use more perimeters for durability.
Also, you can remix it and publish your own design!