Kayoumini C03 20°/25° Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 20° and 25° Camera Mount for the BetaFPV C03.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Information
I made a 20° and a 25° degree camera mount for the BetaFPV C03 cam. I couldn't find any good mounts for the C03 that looked like the original. Kayou Frames has a 30 degree version on their Printables page but that's pretty useless for designing since it's an STL file so I had to start from scratch.
Fitment
It’s a pretty tight fit but the cam won’t get out during a crash or something. I recommend pushing in the underside first and then the top. That’s the easiest way.
Printing Instructions
Print with 95A TPU
Print it with the lens down
Use standard supports on build plate only (tree supports have been really hard to take off for me)
100% infill
Testing
I fly at 25° and personally haven't tested the 20° version so let me know if you encounter any problems!
Other prints
My Build
For anyone who’s interested in which components I used for this build:
Frame: Kayoumini 2.5"
Motors: VCI Spark 1103 7500KV
AIO: GEPRC Taker F411 12A AIO ELRS 2.4G
Cam: BetaFPV C03
VTX: TBS Unify Pro32 Nano 5G8 V1.1
VTX Antenna: RushFPV Cherry II UFL
Props: Gemfan Hurricane 2520
Batteries: GNB 2S 380 mAh LiHV