Baratza Encore ESP Ring Burr Retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ring Burr Holder for the Baratza Encore ESP (Part#: SP0102053)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ring Burr Holder for the Baratza Encore ESP (Part#: SP0102053)
I have tried a model someone else made, but the dimensions were inaccurate for the external tabs and it was incredibly thin bodied. So I designed this one from taking accurate dimensions from the machine and the original part.
This one is a guaranteed fit, in use right now on my machine!
Printed in PLA with built in supports and using Support for PLA to interface between the part and supports for a clean finish. 6 walls make the part solid (support only uses 1 wall). If you print in only 1 material for the support interface as well, please be careful to set the top z-distance to 0.24mm and be gentle removing the supports to ensure you don't break off the tabs.
There are two print profiles available, one for 0.6mm nozzle, and one for 0.4mm nozzle.
Doesn't need to be food grade material as the coffee beans don't actually touch this part.
The part is in expensive on the website, but I don't want to be out a cup of coffee for 5-7 days while it ships. This part prints in less than 1.5 hours for a single, or just over 2 hours for a set of 3 to have some spares.