Kitchen Knife Sharpening Guide 17 Degrees
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixed slidable guide at 17 degrees. Fits a fat honing block with/without the rubber bumper. 66m wide opening.
- Ocena
- 5 / 5
- Polubienia
- 474
- Pobrania
- 1033
- Wydruki
- 2
- Wyświetlenia
- 9524
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Fits a 66mm or less wide common sharpening block. Fixed at 17 degrees for easy operation. Very hard edge knives can take a 15 degree edge, cheaper common ones last longer at 20mm. 17 is a compromise angle used by many for a wider variety of kitchen knives. Designed to slide along the block base while holding the knife at the angle. Holes to help grip. Feet/sliders widened so you can use without the common rubber bumper without sliding into the gap removing it leaves behind.
Made this because other holders were 60mm wide (too snug) and did not slide on the base like I anted this to. Think of it as a useful training device to holding that angle.
Warning; It takes a long time to get a 20 degree edge to be a 17 degree edge. But it's worth it.