1 / 3
Sony 200-600mm Solar Filter Foil Holder — zdjęcie 1
1 / 3

Sony 200-600mm Solar Filter Foil Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple holder for solar filter foil for the Sony SEL200600G lens.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Public Domain

A simple but effective holder for fragile solar filter foil on the Sony SEL200600G.
It features a 95mm filter thread at both sides, allowing you to cover it with 95mm lens caps on both sides to protect the filter in transport.

Apart from the 3D prints, the only required parts are the filter foil and 4 M2x8mm screws.

Assembly is very straight forward:
- Cover top ring in double sided tape (you'll want an as even as possible coverage)
- On a flat surface remove the upper protective sheet of the solar filter foil
- Stick the ring on it
- Cut around it
- Pack away the rest of the foil to not damage it by accident
- Poke something sharp through the screw-holes to pre-puncture the foil
- Screw the top part with the foil to the bottom part of the holder