Print in Place: Grill Buddy Paper Towel Holder and Condiments Tray V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the original so the paper towel supports could be printed in place and would fit on a Core One L.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used PETG, you can see where the towel support cracked when I tried to insert the towel holder. Slimmed down the holder from 30 to 27 mm, then oriented it to be print in place. I don't think it will. come out but we haven't used this at a party yet.
The other change is added a dovetail joint to make it possible to print the verticals. The only problem with that is the joint is 180 mm up from the bottom on one part and 180 up from the top on the other. The dovetail is 12 mm vertical with a 60 or 65 degree angle and 6 mm at the bottom.
All models were sliced using Orca slicer.