1 / 3
fidget bearings double helical gears print in place — zdjęcie 1
1 / 3

fidget bearings double helical gears print in place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a satisfying gear system, it fits in the palm of a hand, and it is print in place

Ocena
0 / 5
Polubienia
10
Pobrania
62
Wydruki
1
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a fidget bearing made with duoble helical gear, this system has a tollerance of 0.3 mm, the ring has 36 teeth while the planets and the sun have 12 teeth, there are 4 planets, the angle of inclination of teeth is 30°, the module is 1.5, pressure angle of 20 degrees, and the gears have a double helical system, The advantage is that it is a self-centering system. This is a fidget game really satisfying!!

INSTRUCTIONS:

  • material: PLA 

  • bed: 60°C

  • nozzle: 210°C 

  • layer: 0.16mm 

  • no supports

  • no brim

  • nozzle size 0.4mm 

  • speed 200mm/s 

IMPOURTANT SETTINGS!!

  • gap closing radius per slicing: 0.001

  • XY size compensation: -0.1

  • minimum perimeter width 50% 

NB: if you won't follow the instructions correctly the gears will they will fuse together, rendering the mechanism unusable!!

POST PROCESSING:

Once off the print bed, give the sun gear a firm twist to break the initial layer micro-welds. * Spin it for a minute to break it in. Adding a drop of PTFE or silicone lubricant will make it buttery smooth!

Good luck!

Tagi