hitbox controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
compact hitbox controller if simple maintainable
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
DIY Hit Box Arcade Controller
A low-cost, fully customizable arcade controller for fighting games, built around Raspberry Pi Pico (RP2040) running GP2040-CE firmware.
Full Project & Source Files
GitHub: https://github.com/nitsuboy/hitbox-controller
(PCB, Fusion 360 source, STLs, BOM, build guide, firmware instructions)
What's Included
PCB — Complete EasyEDA project (schematic + layout + BOM)
Enclosure — Parametric Fusion 360 assembly + print-ready STLs (top, bottom, stand)
Firmware — GP2040-CE (web configurator, XInput/Switch/PS/keyboard modes, macros, SOCD cleaning)
Key Features
Low cost — Off-the-shelf parts
Maintainable — All parts replaceable, hotswap sockets for switches
Hackable — Add buttons, swap displays, redesign enclosure, port to other RP2040 boards
No supports needed — STLs print cleanly on standard FDM printers
Bill of Materials (Summary)
12× Hotswap sockets + switches + keycaps
1× Raspberry Pi Pico (RP2040)
1× OLED 0.96" I2C (128×64)
3× 6×6 mm tactile pushbuttons
4× M4 bolts + M5 binding barrel nuts
Full BOM with links on GitHub
Build it: [GitHub Repository](https://github.com/nitsuboy/hitbox-controller) → See README.md for complete build guide, wiring, and firmware flashing instructions.