CPS3 Hursuit TRFightstick Volume Knob Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for Volume knob on Hursuit/TRFightstick CPS3 metal case.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple spacer for those who replaced their worn out volume potentiometer on the CPS3 PCB. The knob that comes with the TRFightstick case was meant for the original so, this spacer will help fill the gap and fir on the newer knobs with the flattened side. This will let the volume knob sit about 1.8mm from the case.
Print Settings: Babmu Slicer default settings for PETG. It is a reallly tight fit as the knob was meant for friction fit, so if you print this and it just doesn't want to go in, just resize the model by 1% increments till you get a nice fit. The volume knob side should have enough tolerance to handle a slight resize.