Lithophane Box for 156x120 mm Light Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lithophane box for 156 mm by 120 mm LED light board. Can be used for horizontal or portrait oriented lithophanes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
I wanted a lithophane box to display my HueForge lithophanes with an LED light board. I looked at Bambu Lab's design, but I found their box problematic: the light board had to be shoved in from the bottom and was difficult to remove, and the slot for the lithophane itself was too narrow. So I designed my own box.
This box is for a 156 mm by 120 mm LED light board (commonly sold on Amazon at this time; also Bambu), and it will fit on the bed of an A1 Mini. (Turn on tree supports unless you'd rather cut the top off to print separately and glue on afterward.) The box is thick enough that it can stand on its own (horizontally and vertically), and it has enough space between the light board and the lithophane slot that there's no need for a diffusor panel. It can hold lithophanes up to 2.5 mm thick at the edges; if you have a thicker lithophane, increase the box's size in the slicer for the Y axis only.
Use a lithophane that is 155 mm by 120 mm, being aware that a tiny bit of the design (roughly 2 mm) will be cut off on each of the four sides by the box. (An earlier iteration of the box cut off less, but that allowed blinding light from the LED board to leak around the edges if it was looked at from any angle other than straight on.)
As the license says, you're welcome to use this design for any purpose (including commercial) as long as you credit me as the designer.
Enjoy!