DPS5005 Buck Converter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a DPS5005 Buck Converter Variable DC Regulated Power Supply including extra space for a filter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1.1 + General Attribution v1
Parts and Features
This is a box to mount a DPS5005 Buck Converter Variable DC Regulated Power Supply. It includes two 50mm spaced M6 or 1/4-20 clearance holes at the bottom for mounting to an optical breadboard or table.
The model I used from Amazon but any similar model should fit:
Amazon Japan: https://amzn.asia/d/07X4bAPI
Amazon US: https://a.co/d/02X52TGX
My particular use needed very clean power. For this, I've also included a taller model with extra space at the bottom for a DC power filter. This includes the appropriate M3 tap holes for securing it down. I used the following TPA3116 isolation transformer model:
Amazon Japan: https://amzn.asia/d/09iZBkSb]
Amazon US: https://a.co/d/01eeofr4
Printing Recommendations
Oriented the part with the based on the build plate.
It is designed to print with just minimal support on the cable pass-through at the base. However, if your printer is good at bridging it may not be necessary.
Generally recommend three perimeters on a 0.4 nozzle.
Print height, material, etc don't particularly matter.