Prusa MINI Auto-Ejection Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi there! This project presents a part-ejection system for the Prusa Mini, utilizing custom G-codes.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hi there!
This project is about enabling the Prusa MINI to clear its print bed after printing.
Features:
I have created custom 3D printable parts for this setup.
Printer Stand: It consists of 4 parts and can be assembled using 6 pcs of M3x16 screws, or it can even be glued together.
Print Bed Support: I have uploaded two different versions of this part.
Head Shield: Suitable for printers equipped with a V6 hotend.
Control:
The sweeping motion of the printer can be configured in your slicer by modifying the Machine End G-code, adjusting it based on the dimensions of your models.
This setup is suitable for smaller models and parts, which I have also tested. The Prusa MINI was able to sweep off models with an 18x18 mm footprint.
Warning: Do not print large models with this setup, as it may damage the printer itself!
Here is a timelapse of a test print.
This is only a prototype, feel free to improve it!
If you like this project, a like or a download is highly appreciated.
Happy printing! :D