Can mount for G scale trolley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for beverage can for the G scale trolley
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Links
Description
This is a mount for a beverage can for the Flat trolley with pegs.
This can mount fits a "standard" 330ml can, because that was the only can size I had available when I modelled this.
For a complete can mount the part topCanMount is needed 2 times, the part topCanMountRing only once.
The ring has little stubs that fit into holes on the mount parts, but this will still need a drop of glue. It is also a good idea to glue the whole mount to the trolley frame, otherwise the inertia of a full beverage can could rip it of the frame.
The can mount fits on all sizes of trolley frame. For the frames with break platform(s) the platform board (which can be found in the flat trolley model) or the narrower tipper platform board (which cn be found in the tipper trolley model) is needed once or twice (depending on the frame).
I prefer the narrower tipper platform board (see photo).
This model contains only can mount parts. The flat trolley frames and break platform can be found at: Flat trolley with pegs; the remaining needed parts are in the model: G scale tipper trolley.
Printing
All parts are already oriented for printing.
I used PETG via 0.4mm nozzle at 0.2mm layer height with default settings in Prusaslicer.
No supports are needed.