Blade guard for plane irons #4 and #5 - 2" wide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple blade guard with one side sprung inward for a snug grip.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A simple blade guard with one side sprung inward for a snug grip. Prints in 10 minutes on my machine.
Included are a number of .stl files and one .step since iron thickness varies quite a bit I included everything from one that'll accommodate the thin irons in vintage Stanley planes up to 4.1mm for the chunkiest of modern irons. If yours doesn't fall in this size range the model should scale well.
The file names all have the width and thickness in mm.
I printed mine in PETG and that ABS TPU or other less rigid filament is preferred to PLA though I'm sure PLA would work, it'd lose the springiness and not fit snugly over time so if you use PLA you'll also probably want to use tape to secure the guard.