Bluetooth 5.0 JL6925 audio module case with latch and hinges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
$1.50cad Bluetooth case with latch and hinges for the Bluetooth 5.0 JL6925A on aliexpress printed on a ender 3 v2 at…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
$1.50cad Bluetooth case with latch and hinges for the Bluetooth 5.0 JL6925A on aliexpress printed on a ender 3 v2 at height 0.2mm with 0.4mm nozzle 100% infill
used water based paint to fill in letters with color and wiped off the excess paint
hot glued Bluetooth board in to the case
$1.53 free shipping https://www.aliexpress.com/item/1005002341322358.html
currently $1.56 free shipping https://www.aliexpress.com/item/1005002341358063.html
UPDATE!!!
The Bluetooth boards battery in has a flaw that will blow up your battery
there is no charging circuit just connects to 5v usb ports power
this is vary bad as it will try to charge the battery to 5 volts could cause battery fire or blow it up also could damage your charger by pulling to many amps
and it will also over discharge your battery
so do not connect the battery and the USB at same time probably best to just not use a battery
Print Settings
Printer:
ender 3v2
Resolution:
200
Infill:
100%
Filament:
PolyMaker PLA
black
Category: 3D Printing