Helmetron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version of the Helmetor wall helmet mount. What you see in the photo is the "thinn" version.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is my version of the Helmetor wall helmet mount. What you see in the photo is the "thinn" version. The wall mount holes aren't perfect on this version. I may make a v2 of the thinn. The "thicc" version is 2mm thicker. I haven't actually printed the thicc version so let me know how it goes!
Not sure why Prusa Printers rotated my images.
Print instructions
Category: Organization Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 20%
Filament: Cheap PETG Black
Notes:
Unfortunately, this print needs to be completed on it's side, that way the grain of the filament is along the bendy arm. If you print it with the wall mount down, the print will crack when you bend it to put a helmet on.
It's kind of ugly, but if you have your support settings dialed in, it will work.