Freestanding / XChange dial gauge mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A double mounting system for a dial gauge for 3D printer calibration. The brand of the dial gauge is unknown but the…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A double mounting system for a dial gauge for 3D printer calibration. The brand of the dial gauge is unknown but the mounting surfaces are 13.8mm external diameter.
One mount is meant to slide onto a 12mm rod, and the other is designed to screw onto an XChange toolplate.
Parts required:
Gauge clip x 2
Arm x 1
XChange mount x 2
12mm rod mount x 1
Knob x 1
Required hardware:
M4 x 35mm x 2 - Gauge clips to arm
M4 x 15mm x 2 - Arm to 12mm rod mount
M5 x 20mm x 1 (hex head) - retainer for 12mm rod mount, clamping against rod
M3 x 8mm x 4 - XChange mount to XChange tool plate
Assembly should be snug with zero wiggle. The printed parts are likely very tight by design. I filed the mounts slightly until the dial gauge would clip in securely.
Companion video: https://youtu.be/2v7EGDp55n4
Companion website: https://teachingtechyt.github.io/calibration.html#xyzsteps
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
No
Resolution:
150
Infill:
30
Filament:
X3D recycled PLA
Notes:
All parts already rotated to correction printing orientation.
Category: Hand Tools