Glitch Blade - Dual Bladed ambidexterous utility knife/boxcutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There's too little space in the summary box for me to say anything worthwhile about this knife. Please read description.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Yolo! I was dissatisfied by current utility knife designs and decided to try my shot at making my own. As a lefty, many EDC style utility knives are annoying to operate and carry and there is always at least something wrong with every boxcutter I've used. While I'm not saying this one is perfect, It certainly is a step in the right direction.
PLEASE REMIX THIS! I hope this simple design can be improved as much as possible and appreciate you for downloading, printing, and hopefully modifying this little knife
I was inspired by 2 different knives that both had their benefits and flaws and wanted to combine the design into something better: the Screwpop Twin Trak for the ambidextrous dual bladed system and the CW&T Herringblade for the magnetic lock. Neither of these knives satisfied me enough to purchase them so I printed my own.
Features:
Two blades; One knife! Use one for course hacking and the other for fine cutting or keep a serrated boxcutter blade in your non dominant chamber. Your imagination's the limit with what you can do with this
Fully ambidextrous! Give these knives to all your right wing and leftist friends so we can be united by one thing at least /J /S.
Large Blade Area! 2/3 of blade length used
Reversible/replaceable deep carry pocket clip.
Streamlined keychain/lanyard ring
Low cost and print time! took me 25 minutes on my Flashforge adventurer 5m.
Surprisingly solid 3 finger + thumb grip!
Easy blade changes.
Required hardware:
1 6x3mm magnet. Remix If you want to use a different size
1 M2 x 10-15mm screw
Boxcutter blades
Printing instructions:
Supports - Yes (paint on only the lowest overhang and enable bridging for smoother operation. See image ####
Nozzle
Infill - 15%
Pause at layer 197 for magnets
Material - Anything other than PETG... PETG is the bane of my existance
Good luck and Happy printing!
