Parametric BlazeCut Mounts for Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An OpenSCAD parametric model which generates custom BlazeCut fire extinguisher mounts for the Prusa Core One.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I reproduced Sevirium's design in OpenSCAD so I could modify it to fit the newer BlazeCut TR025FK fire extinguisher I have. The BlazeCut endcaps are a bit bigger (24mm) than the tube (20mm), so the mounts need to be different sizes if you want it to attach it to the existing side panel screw holes.
I printed two 24mm mounts and one 20mm mount in PCCF. I used 0.4mm nozzle, 0.2mm layers, though with proper calibration you could use just about any nozzle/layer size for this.
Square nuts and 3mm screws are used to attach the mounts to the enclosure. The zip tie channels are designed for the ones included in Prusa assembly kits, labeled as "2.5 x 160 mm".
STLs and 3MF are provided for convenience. If you need to alter the design, just open the SCAD file in OpenSCAD, alter the user params, then generate the STL from there. There aren't really any guardrails in the code, so make sure you don't have any collisions between the tube seat, zip tie channel, or nut/screw cutouts before printing