1 / 4
Young Electric tilting trike rack license plate holder — zdjęcie 1
1 / 4

Young Electric tilting trike rack license plate holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix to work with a Young Electric Trike Rack.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I saw the original design and initially tried to adapt it directly for my trike rack, but the license place protruded above my truck bed, increasing air resistance. So I modified it to mount further down the rack frame. I printed this in Polymaker ASA due to it potentially having high heat and UV exposure. ABS or PA (nylon) should work from a temp standpoint, although they're not UV stable.

I recommend using 5 wall loops, 5 bottom layers, 5 top layers, and 15% gyroid infill.

Assembly:

Follow the instructions here to assemble the fixed bracket and side brackets:
https://www.printables.com/model/982582-tilting-license-plate-holder-for-1up-bike-rack. The pivot screws and spring pins are oriented outward, as shown in the CAD image. I did not use threaded inserts and machine screws for the license plate. Instead, I used #14 x 3/4" license plate screws tapped directly into the plastic.

Mounting the assembly:

In addition to the pivot and spring pin parts of that design, you''ll also need:
4 x M8x70 carriage bolts
4 x M8 fender washers, 20 to 24mm outer diameter
4 x M8 lock nuts

  1. With the rack pivoted up to the storage position, position the assembly's fixed bracket on the vehicle side of the rack frame with the rest of the assembly protruding rearward through the gap in the frame. The pivots and spring pins should be on top.

  2. Insert the carriage bolts from the vehicle side through the bracket tabs and through the track adjustment slots in the frame.

  3. Use the washers and lock nuts to secure it. The fixed bracket tabs will capture the necks of the carriage bolts, making the nuts easy to tighten with just a single regular wrench or socket wrench. Make sure you tighten the nuts just enough to keep the assembly from slipping and don't over-tighten.

Tagi