1 / 2
Steam Controller Wall-Mount with Puck + Headset holder (Easy Print Remix) — zdjęcie 1
1 / 2

Steam Controller Wall-Mount with Puck + Headset holder (Easy Print Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

5,83 € – 7,12 € netto (bez VAT)

Dla pliku: Steam Controller Wallmount Headset Holder Easyprint_0.2mm_PETG_MK3S_6h47m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 6,47 € netto (środek widełek).

Masa podana przez autora
80 g
Czas druku podany przez autora
6,78 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This model, originally created by PaGo, has had its corner cut away to have it printable in 45° without supports.

Ocena
0 / 5
Polubienia
5
Pobrania
17
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This model, originally created by PaGo, has had its lower corner cut away to have it printable in 45° without supports.

Print Settings

  • Material: PETG (PLA should work fine as well)

  • Infill: 15%, Organic

  • Supports: None

    • Note: the provided 3MF has one additional organic support added for better weight distribution in case of sub-optimal bed adhesion. You can remove that if your bed adhesion is fine – my PETG print stuck to the plate like a charm.

Have fun!

Tagi