Box Inserts for Amazon Basics Removable Compartment Small Parts Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved boxes that fit inside Amazon Basics 19-Removable Compartment Professional Organizer.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Purpose/Background
Most parts organisers for screws etc are quite expensive if you need a lot of them (Sortimo is like $100 for one organiser!), so I purchased a whole bunch of the Amazon Basics 19-Removable Compartment Professional Organizer. Unfortunately they come with very few small bins. Additionally, the original bins have a very steep draft angle and overhangs, as well as being quite loose fits, so there is a fair bit of wasted space in the boxes.
These models are designed to fit the amazon organisers either alongside the original bins or replacing them. They were designed to be closer fitting and to waste less space with steep draft angles etc, so an equivalent sized bin to the original can fit more in it! While I was at it I made sizes the originals did not come with, including some half-height stackable ones, with and without dividers inside.
Other Compartment/Bin Organisers
When originally looking for cheap organisers I also saw the HORUSDY Compartment Parts Storage Boxes which look awfully similar to the Amazon ones. I suspect they may use the same size/shape boxes/compartments inside but I have not purchased any to check. If You have any of these my models may work for them as well, just maybe print only one at first to see.
Print Settings and Supports
I personally print these in:
PETG (although PLA or other materials should also work fine),
0.4mm nozzle,
0.2mm layer heights, and
no brims.
Unfortunately the bins do need supports to print due to the feet on the bottom that engage with the Amazon Basics box to lock them in place. I print the bins right way up and use snug fit normal/grid supports underneath creating a relatively thin support plate that is easy to pop off while limiting the support material needed.
Technically the design could be adjusted to not have the feet and thus not need support if you are ok with the bins moving around when the lid is open (they should hold in place reasonably well still when the lid is closed as the lid also has a grid in it that fits into the bins). If anyone wants that I can probably edit the model to make another version, just let me know.
Feedback and Requests
Feedback is always welcome.
Requests for other sizes etc are also welcome, but I cannot promise how long it will take for me to create them.