Cooling fan test torture test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to test cooling fan performance objectively back to back, so I designed this part to help. Previously I had…
- Ocena
- 5 / 5
- Polubienia
- 289
- Pobrania
- 3993
- Wydruki
- 53
- Wyświetlenia
- 11 176
- Oceny
- 37
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I wanted to test cooling fan performance objectively back to back, so I designed this part to help.
Previously I had noticed the AIO micro 3D printer test did a good job of showing up the flaws of a lack of cooling fan, so I modelled a similar design. The main body is lifted up off the bed to allow a wide and difficult bridge. There are four gradually tilted arcs, from vertical to 80 degrees, pointing up, down, left and right. The reason to see if a fan that only blows from one side is at a disadvantage. The final feature is a central spire that is raised above the rest.
Version 2b was my final design, I recommend only printing this one. The others are included for completeness.
This process is covered in detail in this video: https://youtu.be/xmZCwJDyxYU
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
10
Filament: X3D PLA Post-Printing =============
Inspect!
Check the underside of the bridge, the underside of each arc, and the accuracy of the central spire.
Category: 3D Printing Tests