Beer Mug - Chmielaki 2026
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beer mug Chmielaki 2026 , holds NickNack cups
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Beer mug made for family and friends for Chmielaki Beer Festival in Krasnystaw, Poland
---
More Beer Mugs
https://www.printables.com/@C47_3d/collections/758477
---
It was made to be used on festival to drink beer sold in 0,5l plastic cups - mug printed in 120% size
Works with Nicknack cups (there is a bulge that will go in the cup's holder hole) - 118,5% size
Easier to use than just a cup and safer to use than drinking from a print
You can also use it with bottled beer (100% size), beer can (93%) or just for a decoration
I also used it with 0.5l stainless steel inserts. Mugs were printed in 115% size (may differ depending where you get the inserts)
Fits standard diameter beer bottle (there is a 72mm hole)
You can resize the model in slicer for different diameters
Use the equation:
X / 72 * 100%
where X stands for the diameter you want with added 1-2mm (for a 'safe distance')
So for example for a beer can (66mm, so X will be 68) you need ~94,5% size
Remember to check the widest area (like the bottom of the bottle or top of the cup under the rim)
---
Video
https://www.instagram.com/reel/DbsebAWt5OJ/
---
Model made in Blender 3D
---
Printed with
0.4 nozzle
0.28 layer height
3 walls (perimeters)
7% gyroid infill
Bottom surface pattern: Octagram spiral- with top most set to concentric
No supports
On 118.5% size it is around 171g of filament used
Z-seam set to 'aligned' / 'sharpest corner' or 'user defined' and set to center
The seam should be in the 'channels' in the mug to hide it nicely
---