1 / 1
PB swiss tools Flat screwdriver holder 1-6
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder like the scredriver holder from PB swiss tools with a tilt to the front
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
simple as that a screwdriver holder for the PB swiss tools Flat head screwdriver number 1-6 with a tilt to the front
I printed with Prusa setup 0.25 speed but made the top where the numbers are and also the small detail after the hole which is holding the screwdriver bit back. with less Z distance to get best results. maybe
it could probably also work with other brands if:
1= max Ø3.8
2= max Ø4.4
3= max Ø5.5
4= max Ø6.5
5=max Ø7.6
6= max Ø8.6
if you want you could also change colour for the number