Mackie Audio Mixer Replacement Slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got an old Mackie mixer to use as part of a video job. Of course it was missing a volume slider for one of the channels.
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 222
- Wydruki
- 1
- Wyświetlenia
- 1096
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Got an old Mackie mixer to use as part of a video job. Of course it was missing a volume slider for one of the channels. Here is the replacement I created built from dimensions taken from one of the original sliders.
After review of the printed piece I will probably go back and change it up a bit. This one works well but it isn't close enough to the originals for my liking.
Print instructions
Category: Audio Instructions
Printed with MakerWare default high quality settings. Printed upside down with supports. I did have to do a bit of cleaning up of the supports and used a small file to get the indents good enough.
It is a bit snug on the metal part of the slider but it fits well.