Jasion EB5 Clip On Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on battery port connector cover for the Jasion EB5 e-bike; protects against mechanical damage and buildup.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This easy-to-print battery cover for the Jasion EB5 e-bike is meant to protect the battery port hardware whenever the battery is not on the bike. Just clip it or slide it on until it rests over the hardware after removing your battery.
Storing your bike while you're charging the battery, or taking your bike out without the battery for a conventional ride is where this comes in.
This is meant to protect the battery contact pins from mechanical damage from bumps or falls, and not let dust or dirt buildup on them. I do not recommend trusting this to prevent rain or water damage.
PLA works well, and I recommend 3 perimeter layers and at least 20% infill.