Kayoumini Arm Protector Heavy 11xx Taller Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The heavy arm protector by Kayou Frames made a bit taller.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Information
This is a taller version of the heavy bumper made by Kayou Frames. I modified the design because the bottom of the bumpers were at the same height as the bottom of the screws so I you want to do a few cool skids you'll damage the screws. With this version you won't!
Printing Instructions
Print with 95A TPU
Print it in the orientation that's used in the pictures below
No supports required
Print it slowly and with a lot of cooling so there won't be any sagging on the overhang.
30% Cubic infill
Other prints
My Build
For anyone who’s interested in which components I used for this build:
Frame: Kayoumini 2.5"
Motors: VCI Spark 1103 7500KV
AIO: GEPRC Taker F411 12A AIO ELRS 2.4G
Cam: BetaFPV C03
VTX: TBS Unify Pro32 Nano 5G8 V1.1
VTX Antenna: RushFPV Cherry II UFL
Props: Gemfan Hurricane 2520
Batteries: GNB 2S 380 mAh LiHV