Compound Bow Square Improved
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An advanced compound bow square to help tuning nock point height and arrow rest position with a shaft cutted part.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This multi-part square helps setting the nock point height and arrow rest height with a cutted part of your shaft.
The only part not printable needed (except your nock) is a shock cord (textile elastic) with a small diameter (2mm aprox.) used to maintain the shaft part fixed during usage.
About the nock sliding part chariot-encoche , you may make a cuboid 9 x 9 x 11 (heigth x width x depth) including a hole that fit your nock pin or bushing diameter and print it inside the part.
 |  |
|---|
Tip : when printing chariot-mobile-tube and goupille-* parts, you may use XY Contour Compensation with a value of -0.10 mm to allow easy movable tolerences (I've not included moving clearances in part dimensions).
Changing the shaft is easy (e.g outdoor shaft to indoor shaft) :
Important update :
I made a part (porte-elastique) that keeps the bow square correctly positioned on the central serving of the bowstring. This part holds a shock cord (higlighted in red and blue on following picture) in order to press the top notch of the square against the serving, preventing it from lifting due to the weight at the end of the square. My top notch had significant clearance, which distorted the measured 90° angle.
