1 / 2
Lower Rear Bicycle Light Bracket for Tubus Logo Evo — zdjęcie 1
1 / 2

Lower Rear Bicycle Light Bracket for Tubus Logo Evo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lowers the light's mounting point by 40 mm to make sure small rear lights stay visible with luggage on top.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I have the tiny SON rear light on my bicycle rack and it's great. But when I go bikepacking and put some luggage like dry-bags on top of the rack, they sometimes hang down at the rear end and cover the light. So this mount is to make sure the light stays visible.

It fits into the 190 mm spacing between the 10.5 mm tubes of a Tubus Logo Evo rack, is simply attached with zip-ties and has two pockets for M8 hex nuts (which came with my rear light). The cable is routed through the rack tubes in the picture, through a hole I drilled myself.

When printing, pick enough bottom layers to make sure the entire rear-facing surface is solid until the M8 pockets. This makes the bracket much more stable. For a 0.2 mm layer height that means ten or eleven layers.

Tagi