Xerox WorkCentre/VersaLink toner refill funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A refill funnel that makes it easier to refill your toner cartridge while helping prevent toner dust spills and mess.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of @gigiga's model. I remodeled the funnel in Fusion to get a better fit but more importantly to have a much bigger funnel. The original model still required refilling carefully and I wanted to fix that with more filament.
I provided the Fusion file in case you want or need to tinker with it. The file is mostly parameterized and can be adjusted quickly.
Print instructions
No need for supports. Just add a brim to avoid it coming loose during print - or just print it upside down. I printed with PLA+ on a 0.4 nozzle with 0.2 layer height. Filament doesn't matter as there's no mechanical wear to or stress on the material.
To shave off printing time, you can definitely use thicker layers once the adapter (bottom part that attaches to your cartridge opening) is printed. Above there's no need for cosmetics.
Important
The original model was designed for a Xerox WorkCentre 6515. This remix also works for cartridges from a Xerox VersaLink C8000. Let me know in the comments if this print worked for your model as well.