Articulated crystal dragon remix

Hi

This is a remix of Cooper's Creations Improved Crystal Dragon. 
Model was very good, but i liked to make some little changes.

Changes:

• Head and tail were little bit to big for my taste. Scaled them down to 80%. Each next link is larger by 4% steps, back to 100%.

• Added little chamfer to the bottom of the leg links for a little bit better mobility.

• Positioned the body so that the links should not touch and be infused together when printing.

• Removed evenly about 0.2mm from the bottom the model for even smooth printing surface. Clean print plate is still important!

NB!

• Clean your build plate thoroughly with soap and water. If you have first layer fail or it comes loose then it is likely bed adhesion issue. 

• When print is finished then let the build blate fully cool down before trying to remove the model. It will help to come loose more easily. Be very careful when removing the model. 

• It is a delicate model and not meant to be played roughly. The links are still delicate and the edges are sharp. Not recomended to give little kids to play. They will likely break it. 

• Like with other same crystal dragons, it is not recommended to scale the model down.

Dragon dimensions:

• Full length: 360 mm

• Full width from legs: 90 mm

• Height: 38.2 mm

Both print profiles have two plates. First plate has only dragons on it. Second plate has also bag clips for flushing. When using second plate the purging volume could be lowered more (at the moment the multiplier is 0.9).

Do you want to sell 3D prints of my designs or support my work? You can also join my commercial membership on Patreon:
https://www.patreon.com/cw/AndresMakes/membership

My main account is in Makerworld, user AndresMakes. There you can find much more of my 3D models:
https://makerworld.com/en/@AndresMakes/upload