Hanging Wire Hook for Holiday Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Mother wanted to install holiday lights this year and needed some new wire hooks to install around the eaves of the…
- Ocena
- 4,333 / 5
- Polubienia
- 20
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 393
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
My Mother wanted to install holiday lights this year and needed some new wire hooks to install around the eaves of the balcony. I designed these for her in solidworks and printed them in ASA to ensure weather stability.
Love You Mom ♥
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Yes
Supports:
No
Infill:
100%
Filament:
Polymaker ASA
Black
Notes:
Use a brim to keep the part on the plate, at least 6mm on ultrabase.
Tips
There are two versions, one with a screw installed from the front and one with both sides. The front facing screw is a bit sturdier but the back facing one is easier to install in tight places or at angles.
Print in a UV resistant plastic to be sure that they last. ASA, [Colorfabb](https://www.amazon.com/colorFabb-90-285-113-Filament-Diameter-Black/dp/B01I4VZXNK?dchild=1&keywords=colorFabb&qid=1618263217&sr=8-3&linkCode=ll1&tag=thingiverse09-20&linkId=1ee3dc99cc4c4e6ea97eb2d25ece1b71&language=en_US&ref_=as_li_ss_tl) HT, Natureworks 870 etc.The hole for the screw shank is 4.5mm and is shaped for a countersink type head. The screw is driven at a 45d angle.
Drill a pilot hole approx 2.5mm before installing the screw, it will make your job a lot easier.
Category: Outdoor & Garden