Bombomb Pre-Supported For Resin Printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick Bombomb model I made for my sister after we were feeling nostalgic for Super Mario 64 . It's pre-supported for…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick Bombomb model I made for my sister after we were feeling nostalgic for Super Mario 64 .
It's pre-supported for resin but I see no reason it couldn't be printed on FDM.
If your slicer application automatically drops the lowest point to ground, Sink the model 0.1mm below build plate for 24 and 32mm models, 0.2mm for the 48mm to ensure support bases are touching the plate.
Print Settings
Printer:
Sonic 4K
Rafts:
No
Supports:
Yes
Resolution:
50µ
Infill:
100
Filament:
Phrozen Resin
Black
Notes:
Sink model 0.1mm below build plate for 24 and 32mm models, 0.2mm for the 48mm.
Category: Toy & Game Accessories