1 / 6
PolarPup v2.0 – Magnetic EDC Razor Knife — zdjęcie 1
1 / 6

PolarPup v2.0 – Magnetic EDC Razor Knife

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PolarPup v2: Magnetic 3D-printed EDC razor knife. Locks open/closed, ultra-fidget-friendly with smooth flipper action

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
94
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

🐾 PolarPup v2 – Magnetic EDC Razor Knife

Meet PolarPup v2, a compact and clever 3D-printed everyday carry knife that blends playful design with smart magnetic engineering. Inspired by the Vosteed Corgi V (https://www.vosteed.com/products/corgi-v-a3705), the PolarPup uses opposing magnets to lock the blade securely in both the open and closed positions — so it stays safely in your pocket until you’re ready to use it.

Designed around a standard Stanley razor blade, the PolarPup makes blade swaps quick, easy, and completely tool-free. With multiple deployment methods — front flipper, grip flipper, or a smooth swing-open motion once you get the feel — it’s also one of the most fidget-friendly knives you can print, thanks to its springy button action and multiple deployment methods.

🧲 Required Hardware

  • 2 × 8 mm × 2 mm magnets

  • 2 × M3 × 10 mm nuts and bolts

  • 1 × standard Stanley-style razor blade

⚙ Version 2 Enhancements

The PolarPup v2 was literally designed from the ground up (because I lost my original files on an old computer!). After carrying mine daily for almost a year, I kept track of all the things I wished were different and here is that list:

  • Much tighter fit for the razor blade so it is held secure

  • New tab to easily release the razor blade when changing it

  • Raised blade pivot for smoother operation (no more sanding required)

  • Retaining ring for the magnet in the handle (no more super glue needed)

  • Cham-fillet edges for better printing (no supports needed)

⚙ Recommended Print Settings

These are tuned for strength, precision, and smooth motion on small mechanical parts like this knife:

0.4mm Nozzle

Material: PLA or PETG (PLA has held up surprisingly well, as long as you have enough outer layers)
Layer Height: 0.20 mm
Infill: 15–30% (Cubic is my preference)
Perimeters: 5-6 (especially if using PLA)
Supports: None are necessary (but if your printer struggles with bridges, you can add them under the bolt recesses. Avoid adding them where the blade sits!)
Orientation: Print handles flat on the bed for dimensional accuracy and smooth face finish (files are already oriented this way)

0.2mm Nozzle

Material: PLA or PETG (PLA has held up surprisingly well, as long as you have enough outer layers)
Layer Height: 0.08 mm
Infill: 25% Cubic infill pattern
Perimeters: 4
Supports: Painted supports for the blade holder to avoid where the blade sits. None are completely necessary, but certainly help if your printer struggles with bridges. Note: Avoid adding them where the blade sits!)
Orientation: Print handles flat on the bed for dimensional accuracy and smooth face finish (files are already oriented this way)

⚙ Assembly Instructions

⚠ Disclaimer

The PolarPup is a fancy plastic blade holder, not a full-metal knife. Please use responsibly and only for light-duty tasks such as opening packages, hobby projects, or small cutting jobs.

It’s not intended for heavy-duty work or prying. Treat it with care, and it’ll reward you with an incredibly satisfying magnetic snap and fidgetable action that’s hard to put down.

Tagi