Sears Kenmore 158.331 Blind Stitch Brass Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement gear for the brass gear located inside the Sears Kenmore 158.331 for the blind stitch function.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D printed gear is meant to serve as a direct replacement for the Blind Stitch Gear in the Sears Kenmore 158.331 series of sewing machines. This was designed and tested on my own machine.
If you are unable to print this gear yourself, I offer a printed version for sale on Etsy.
https://veritylabsolutions.etsy.com/listing/4592314880/sears-kenmore-158331-3d-printed
If you have another gear that is not this exact machine model, please look into getting a custom gear made through the following link, or if this gear does not work on your machine, you will be offered a discount to my custom gear service.
https://veritylabsolutions.etsy.com/listing/4592314880
Printing
Material: PLA
Nozzle: 0.4 mm
Layer Height: 0.10 mm
Seam: Random
Supports: None
Installation
Remove brass gear assembly from your machine.
Remove broken/worn gear.
Place assembly in the freezer for minimum 30 minutes.
Using the included spacer, align the gear with the knurled surface, then with a hammer or mallot, gently tap on the spacer to wear the gear into place. Fine tune gear level with a flat head screwdriver and light tapping.
Gear Dimensions
OD: 18.5 mm
ID: 12.1 mm
Teeth: 24
Helical Angle: 7°