LEGO minifigure Hex edging (for rewored version)

I didn't like the look of the exposed connectors around the outside of the Hex Wall, so I created a set of printable edge pieces that attach using the existing connector system and give the display a cleaner, finished border.

To make these, I rebuilt the hex in Onshape and used its geometry to create matching edging. The edge pieces connect in the same way as another hex, and I have included shortened versions so they tessellate correctly at corners and allow you to create an unbroken border.

I have also included versions with a screw hole, allowing the Hex Wall to be mounted using the connector position if desired.

Since I was rebuilding the hexes in Onshape anyway, I also created a modified hex where the connector slots do not pass all the way through the part. This hides the connectors from the front and creates cleaner seams between adjacent hexes.

Please note: I have not yet tested the modified hex models, so feedback is welcome if you print them.

The edge pieces are compatible with the original Hex Wall model, although for the cleanest overall appearance you may prefer to use my modified hexes as well.

Printing

As with the original model, print the edge pieces on their side. This helps maintain the shape and dimensional accuracy of the connector features.

Onshape Source

The editable Onshape model is available here if you would like to modify or customise the design:
https://cad.onshape.com/documents/6f7e99a5a7e6d1f2fc13dc86/w/4ee93f906d6404694c2e456d/e/a657de45b62e33dd1990dc45?configuration=List_bhULWxf64p9Lh0%3DDefault%3BList_swedanWl8XXo7o%3DShort_Left%3BThrough_All%3Dfalse&renderMode=0&uiState=6a7672c6dca1f124c027f66a