1 / 1
HTD Timing belt pulley to fit on hex shaft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This timing belt pulley fits on a 1/2" hex shaft
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a 17 tooth timing belt pulley. It fits HTD-5 timing belts and will slide on a 1/2" hex shaft often used in FRC Robots. The extension on the pulley can fit into a polycarbonate tube from AndyMark.
This was made using FreeCAD. FreeCAD has a great pulley maker.
Designed by EthanW-27 of the Compass Robotics team.