Horizontal Drill Stand for 43 mm Collar Drills
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact 3D-printed drill stand for stationary sanding and light workshop use.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
The HF-WE-007 Drill Stand is a compact 3D-printed holder designed for drills with a 43 mm auxiliary-handle collar.
It keeps the drill in a fixed horizontal position and was tested with the Black & Decker HD555K.
Tested accessory setups
5-inch hook-and-loop backing pad with sanding discs
2-inch hook-and-loop backing pad
2-inch threaded quick-change sanding setup
Rubber sanding drum
Confirmed tested uses
Sanding wood
Sanding fiberglass
Finishing 3D printed parts
Hardware versions
Imperial
1/4" × 1.5" hex-head screw
1/4" nut
Metric
M6 × 40 mm screw
M6 nut
Both versions also use:
4 wood screws #8 × 1"
After support removal, lightly sand the inside of the clamp with 120-grit sandpaper.
Mounting
Mount the stand directly to a workbench or to a removable 15 or 18 mm MDF panel.
Compatibility
Designed for drills with a 43 mm collar.