Alpha Strike Token & Template Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A multi-color token and template set for BattleTech: Alpha Strike, including ranges, rulers, status and critical-hits
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A collection of 3D-printable tokens, round inch templates and measuring rulers designed for BattleTech: Alpha Strike.
The goal of this set is simple: replace piles of cardboard counters and improvised markers with a compact set of reusable, easy-to-read tokens that look great on the tabletop.
All models are designed for multicolor printing, making different tokens easy to identify during a game.
Templates & Rulers
The set includes:
10" Air Strike template – shaped like a runway for easy placement and quick identification.
6" template
2" template – the reverse side features a minefield design, giving the template a second use.
1" template – included as a useful general-purpose small template.
1", 2", 3" and 6" measuring rulers – compact wargaming-style rulers.
Special Ability & Status Tokens
Electronic Warfare & Targeting:
NARC
TAG
STL (Stealth)
ECM
C3 Networks (C3I, C3M, C3S)
These make it much easier to keep track of special equipment and network states directly on the tabletop.
Heat Tokens:
Three different Heat markers are included to make heat tracking quick and visible during play.
Critical Hit Tokens:
Dedicated markers for: Reactor, Weapons, Weapon Control, Movement Points, Shutdown.
🖨 Printing Guidelines
No supports are necessary for the main tokens and templates.
While designed with multicolor printing in mind (for maximum readability of text and symbols), these models can easily be printed on standard single-extruder / single-color 3D printers using a standard 0.4 mm nozzle without any multi-material upgrades (AMS/MMU).
Recommended Slicer Settings for Single-Color Printers:
Nozzle Size: 0.4 mm
Layer Height: 0.2 mm
Outer Wall / Line Width: 0.35 mm (provides extra precision for small iconography and text)
Manual Filament Change: Insert a Pause at Layer / Color Change on Layer 6 (applies to most tokens in the set) to swap your filament manually from the base color to a contrasting top layer color.
This is an unofficial, fan-made accessory for tabletop wargames.