Window for the Beehive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and practical window for a beekeeping structure, designed to be installed with a piece of Plexiglas and four sc
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Share Alike
This 3D-printable window allows you to easily add a small viewing window to your beekeeping structure. Its simple design makes it suitable for various homemade beehives, bee houses, or other beekeeping constructions.
For assembly, you will also need:
1× Plexiglas sheet: approximately 7.5 × 7.5 cm, about 1 mm thick
4× screws: 3 mm in diameter
The Plexiglas is placed behind the frame and secured with the four screws.
This window is especially suitable for homemade beekeeping structures and provides a simple way to add a small viewing window to your setup.